![Techtweet](<img src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi7UI6eaGCRcWpm8nQ6Ho0ebjrKavSuenvjWhvL3g9fZhiUfJ1c6nVonwaBI_dbjO2OJKePuOmFer2oE_FgyHBCNgSnwO_EPNJgt76bTa1TcvlUS11uUfu_JdXvWYvvCAeggwSVbNO_VSmi9H9xIBtrYLbxpTrVO9-BJ3hm0G3YOpi6TSENk8MyeD0Avw/s1600/LOGO%204.png" alt="Italian Trulli"></img src="https:>)
Zoom All Tips and Tricks (Advanced Settings) Part 2
Zoom Tips and Tricks (Part 2)
The following options can be found here.
•Enable de-noise
• Enable hardware acceleration for virtual background:
• Enable hardware acceleration for video processing
• Enable hardware acceleration for sending video
• Enable hardware acceleration for receiving video
• Video Rendering Method
• Video Rendering Post Processing
• Video Capturing Method
Audio
Audio settings are determined from here. These are discussed below.
Speaker
• Test Speaker: Test the effectiveness of the speaker by clicking this button Can be done. Clicking on the button Output Level: The functionality of the speaker is diminished by seeing the spots displayed on the bar. To close . To click on stop.
• Speaker / Headphone: Connected to the system from its drop-down Speakers or headphones can be selected at will.
• Volume: Use this bar to increase or decrease the volume. Is.
• Microphone
• Test Mic: Click on this button to test the functionality of the microphone. Can be done. Record some words in the record mode by clicking on the button and verify the current state of the microphone by playing it. It is possible to take. When playing
• Input Level: The effectiveness of the bar is understood.
• Same as Systen: There is more under drop-down There are options. From there, select the required option Goes. However, by default this option is selected. 0 Volume: Manually reduce the volume of the microphone from this bar Or increases.
• Automatically adjust volume: Automatically adjust volume If you want to do, you have to select this option.
• Use separate audio device to play ringtone simultaneously: If you want to use separate audio device to play ringtone at the same time, then you have to select this option.
• Automatically join audio by computer when joining a meeting: If you want to keep this option has to be selected.
Mute my microphone when joining a meeting: If you want your microphone to be muted at the beginning of the meeting. However, you have to select this option.
Press and hold SPACE key to temporarily unmute yourself: If you want to temporarily unmute yourself during the meeting, you have to select this option to hold it while holding down the spacebar.
• Sync buttons on headset: If you want to sync the buttons on the headset. This option has to be selected.
If you want to get some advanced audio options, stay at the bottom of the screen. Click on the Advanced button.
• Show in-meeting option to “Enable Original Sound” from
microphone: You must select this option to display the in-meeting option. As a result, there is an opportunity to enable the original sound.
Chat:
Various chat settings can be set here.
Virtual Background
If you are not willing to show your background to others while participating in video conferencing, you can use these wonderful virtual backgrounds. You can use pictures or videos. Select the Virtual Background tab. You will see several backgrounds. If you select any, it is selected as the current background. Maybe you have to do a video conference. Virtual backgrounds can be a great solution in case you are not comfortable with it or you are not comfortable with it.
• Ihave agreen screen: If you have a green screen in the corner, that's it If you want to set it in the background, you can select this option at the bottom of the screen.
Mirror to others
• Mrror my video: Water mirrors your video completely If you want to present, you can select this option. Recording During video conferencing or video meeting, you can record full video if you want. In that case you need to pre-determine the recording options. You can set these options as you wish during the recording. Selecting the Recording tab from the Settings screen displays several options under Local Recording.
• Location: By default a lacquer is set for storing recorded videos. However, you can change this location as you wish. Click on the Change button Can be changed. You can click the Open button to open the folder where the recorded video is saved.
Choose a location for recorded files when the meeting ends: If you want to be asked where to save the recorded files after the meeting, you have to select this option Can do .
Record a separate audio file for each participant who speaks: f you want to record the audio of each person participating in the meeting as a separate file, you have to select this option.
Optimize for 3rd party video editor: If you want to optimize the recorded video for third party video editor, you have to select this option.
• Add a timestamp to the recording: Can. One in the recording If you want to add a timestamp, you have to select this option.• Record video during screen sharing: This option must be enabled beforehand if you want to record DDO while sharing screen.
• Place video next to the shared screen in the recording: This option must be pre-enabled if you want to place the video after the shared screen in the recording.
• Keep temporary recording files: Temporary recording files If you want to leave, you have to select this option.
Profile
You can make changes to your profile from the Profile tab. Clicking on the tab will give you several options.
Add / change profile picture: If you want to add your profile picture, you have to click on the profile image icon on the screen. Will appear in a window. From here, click on the Change Picture link, select the picture from the specific location and click on the Save button.
Edit profile: Add any type of profile to your profile. You can do this by clicking on the Edit My Profile View button.
Using the paid version: The free version of Zoom has some limitations. If you want to take full advantage of the zoom, you need to buy and use the pre-version. If you want it, click on the Upgrade to Pro button. Click and follow the next payment steps.
Advanced Features View: If you want to see the Advanced Features of Zoom, you have to click on the Advances Features button. Statistics In the case of audio, video and screen sharing, the zoom statistics can be viewed from the Statistics tab. Here you will find more information about CPU and memory status, bandwidth, network type, proxy, connection type, data center, encryption, version, etc.
Keyboard Shortcut
You can use keyboard tokens to get the most out of using the zoom software. You can set the task by setting the shortcut to the specific corner for the specific task by selecting the specific option from the settings.
After setting the keyboard shortcuts, if you want to restore the default shortcuts again, you have to click on the Restore Defaults button.
Accessibility
You can make some changes related to accessibility by selecting the Accessibility tab.
• To make closed caption font size normal, medium or large Use the Closed Caption Font Size slide.
• If you want to keep the meeting controls always on display, you have to select the Always Show Meeting Controls option under Meeting Controls.
• Chat Display Size if you want to increase the size of the chat display You can do this from the drop-down box under (Ctrl +/-). Besides. You can also make it bigger by pressing +/- with the Ctrl key.
Read more >>
.jpg)
