Computer turns on but no signal to monitor

Computer turns on but no signal to monitor









1. Turn off the system and unplug the power cable from the main system (as a precaution).





 2.  Remove all RAM from the memory suite.

 3.  Wipe the RAM connectors with an eraser.


 4.  You have to clean the RAM suit with a stiff brush.


 5.  Turn on the computer without installing RAM and make sure there is a beep sound in the corner.


6. If you hear a beep sound, you need to turn off the computer, install RAM and start the computer.


 


 7.  The RAM is problematic if there is a beep sound in the corner.


 8.  If you don't display it again, you will have to install new RAM.


 9.  Replace RAM and check again.  In most cases, the reason for not displaying is the problem of RAM.

Local if not resolved in the end.  You have to show someone experienced with the service center in the corner.





Our last word, you must let us know in the comments how the tips given to us.

If you want to post a guest on our site, be sure to send it to our Gmail address.  Our Gmail address is contacttechtweet.info@gmail.com.  Send your Gmail and your name.



Note: Posts must be of good quality.  Of course, the images must be optimized.  Posts must be at least 1500 words.  Posts must be completely copyright free.  Thanks for staying with us!
Next Post Previous Post
No Comment
Add Comment
comment url
https://www.videosprofitnetwork.com/watch.xml?key=462b720999c158d84e03e95126cbb35c